Roof
Coatings Make your roof like
new again with roof coating and roof waterproofing products - all tested in
extreme climates. Roof coatings
and cements are available with a wide range of properties and consistencies to
fit a multitude of purposes. We will know what
is best.
South Philly, West Philly Flat Roof - $300.00. |
 |
Low
viscosity,
non-fibered coatings are formulated as penetrating primers and damp proofing
coatings.
Medium viscosity, fibered and non-fibered coatings and
cements are formulated as interply adhesives and top coatings for use on
commercial, industrial, and residential roofs. Some of these coatings
incorporate pigments (aluminum, titanium dioxide and others) to reflect the
damaging rays of the sun, creating a longer performing and more energy-efficient
roof. High viscosity, heavy bodied cements are designed for adhering
waterproofing membranes and components, and for patching and repairing leaks.
|
|
The primary advantages of roof
coatings and cements
are their economical, proven performance life, and ease of use. Roof coatings
and cements are generally one-component products that can be applied directly
from the container. This blend of bituminous resin and solvent
is further combined in various type mixing or dispersing vessels with special
clay fillers, surfactants, fibers or fillers to create a gelled coating.
Reflective aluminum pigments may also be incorporated into the mixture to
formulate a coating that provides protection against the damaging effects of the
sun's rays. The proportions of each of these components ultimately determine the
consistency and properties of the coating or cement.
|
 |
|
POLAROOF RAC is a single component urethane, modified with bright aluminum
flakes and fire retardant chemicals. It is especially designed as a
waterproofing membrane for all kinds of roofing. POLAROOF RAC is tough and
elastic with a high tensile strength and good puncture resistance, and contains
corrosion-inhibiting pigments for protection against rust and acid rain.
POLAROOF RAC is approved by Underwriters Laboratories® (UL) and Factory Mutual
Research Corporation®
|
|
 AES-100 2-part flexible epoxy system
is the top of the line roof coating and waterproofing system. For waterproofing
parapet walls we recommend Formflex 6000 a top-of-the-line product. Roof Mate
from United Coating is also formulated for all type of roofs. For more cost
effective roof recoats, we recommend Ultra Shield acrylic elastomeric roof
coating. |
|
Roof Coating
Products
Aluminum
Roof Coatings & Paints, Asphalt Emulsions & Primers, Asphalt
Shingle, BUR Roof Coatings,
EPDM / Rubber Roof Coatings,
Elastomeric Roof
Coatings & Top Coatings,
Foundation / Below Grade Concrete Waterproofing
Coatings,
Ponding Water Patch &
Fillers,
Primers, Asphalt Based Primers,
Primers,
Non-Asphalt Waterproofing Primers, Roofing Foam (high density spray-on
foam for roofs, foam repair, refrigeration and attics),
Roofing Granules,
Walk Deck / Traffic Grade Coatings. |
|
POPULAR PRODUCTS:
AES-100 /
125 (Flexible 2-part Epoxy Coating, withstands ponding water,
chemically resistant, super
reflective, superior to all other coatings tested)
EPDM Multi-Purpose Primer
Formflex 6000 White Flexible
Coating (parapet walls and general purpose)
Formflex 7000 Hypalon / TPO /
PVC Roof Coating
Geo / Henry 421 Economy
Aluminum Roof Coating
Geo / Henry 431 Fibered
Aluminum Roof Coating
Henry 280DC Elastomeric Roof
Coating (Title 24, Energy Star, Miami Dade)
Henry 555 Brilliant Fibered
Aluminum Roof Coating
RoofMate Basecoat (gray color,
designed for embedding fabrics)
RoofMate Butter Grade (butter
coat)
RoofMate Ceramic (elastomeric
with ceramic beads for heat insulating,
fireproofing and longer term
reflectance)
RoofMate Elastomeric Roof
Coating (Title 24, Energy Star, Miami Dade)
RoofMate LP (for for coating
asphalt / bitumen based surfaces)
RoofMate HT- High Tensile)
(cures harder, for light traffic roofs)
Superior Seal Roof Coating (CRRC
Rated, high solids, ponding water rated).
Ultra
Shield Elastomeric Roof Coating (great properties and price)
|
|
|
|
POLAROOF RAC
FEATURES:
Can be used over BUR, EPDM, Hypalon, modified bituman, metal,
concrete, foam, wood, primed composites, masonry and others
Produces a fully adhered, seamless, high density, waterproofing
membrane
Protects substrate against rust, corrosion, UV damage, acid rain
and fungal attack, fats and grease
Easy to apply directly out of the container by brush, roller or
airless spray
Reflects radiant heat for enhanced energy efficiency
May be used on vertical, pitched and horizontal surfaces
Lightweight membrane does not require removal old roofing
materials, saving time and money
Remains flexible, tough, and weatherproof at low temperatures
and will not flow at high temperatures
Rapidly develops high tensile strength
Will not re-emulsify or wash away with rainwater
Easy to use single component formula means no measuring or
mixing
Will not become brittle and crack with age
10 year warranty.
|
|
|
|
|
|
|
|
|
Aston 19014,
Bryn
Mawr 19010,
Drexel Hill 19026,
King of Prussia 19406,
Malvern 19355,
Media 19063,
Delaware County, Delco, Philadelphia, PA
|
|
|
Let
Us Price Up Your Job!